Your system comes pre-configured for 5. Open the speaker controls software and make sure the VersaJack is set to Analog Out. Rear speaker placement The best surround effects are obtained by placing the rear surround speakers slightly behind the user and approximately the same distance apart as the front satellite speakers. Open the speaker controls software and use the graphic equalizer to boost the high frequencies. Move the power cord from the power surge protector if applicable and plug directly into an AC wall outlet.
|Date Added:||27 May 2007|
|File Size:||9.30 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Subwoofer Level control The Subwoofer Level rotary control is located at the rear of the subwoofer. The subwoofer should NOT be placed near computer hard drives.
If your listening environment permits convenient wall-mount access, you may wish to take advantage of this feature by following these instructions:. The subwoofer is NOT shielded and should be placed at least 2 ft 0.
The port needs a minimum of 4 in 10 cm clearance from a wall or other obstruction.
Move the power cord from the power surge protector if applicable and plug directly into an AC wall outlet. This test is usually performed when no sound is detected from the speakers, and after all other solutions have been tried in the “Table of problems, possible causes and solutions. Diagnostic output connector In order to help diagnose system problems, an output jack for speaker testing is located at the rear of the subwoofer.
Try a music signal with more bass. Acoustic Port information The subwoofer has two large openings at its rear called acoustic ports.
Original Dell Altec Lansing Ada995 5.1 THX Certified Sound Speaker 4j133
You can also lay it flat; you can even place it under desk drawers if space permits. Position the subwoofer at least 2 feet 0. Not enough high frequency response High frequency bands not boosted Open the speaker controls software aea995 use the graphic equalizer to boost the high frequencies. Open the speaker controls software and use the graphic equalizer to boost the high frequencies. Here is how to do it: Too much bass or subwoofer is distorted. It’s ratings are 5.
Original Dell Altec Lansing Ada THX Certified Sound Speaker 4j | eBay
Refer to the software documentation to make sure that settings are correct for the desired output, then restore defaults. A spare fuse is included with your system. You can adjust the subwoofer sound level using the Subwoofer Level control.
Each satellite speaker cable has a color coded plug at its kansing. Do not touch the exposed ends of the triple cable plugs with your fingers during this procedure.
Dell Altec Lansing Ada995 5.1 Lucasfilm THX Certified Sound Speaker System
The difference in output between corner placement and side-wall placement is about 6dB – in favor of corner placement. Top View Wall-mount brackets For your convenience, two wall-mount brackets are enclosed for use on the rear speakers.
This connection is used with the plugs on the subwoofer’s triple cable. You will now test each plug of the triple cable separately. On illuminated see item 1 on graphic. You may find the chart below useful.
The Subwoofer Level control affects the subwoofer level only. If you have a 21 in. Now you are ready to connect alnsing subwoofer to the sound card. Deactivate the computer keyboard mute control. If either of the satellites fails to sound the test tone, check its cable connection to the subwoofer. Do not insert the power plug into an AC outlet until all connections are made.
The distance between the subwoofer and satellites affects the sound in the region where the subwoofer’s output overlaps the satellites’ output. If the distance is greater than 5 ft 1.